01-23-2015, 11:56 PM | #16 |
slug
Join Date: Dec 2007
Posts: 21,843
|
Turns out I have a can of tung oil, so tung oil it is.
__________________
|
01-27-2015, 12:25 PM | #17 |
Member
Join Date: Dec 2014
Posts: 105
|
I used to start out with a parts washer with fresh fluid and a green or blue scotch bright pad if the stock was really soaked badly then follow up with mineral spirits after sitting the stock in the sun in a black plastic garbage bag for a bit to "sweat out" any excess. That gets 99% of it without bleaching the wood or lifting cartuche's. That will get most of it, even most of the black spots. Unless the black is from oxidation, then paint stripper may be necessary to get that out.
|
Thread Tools | |
Display Modes | |
|
|