DIY wine cellar project - Page 6

Sanders · 11-09-2017, 12:55 PM

Do you have any special HVAC going into the room to control the temp of the wines, or will it just be at whatever temp the house is kept at?

buzgun · 11-09-2017, 06:52 PM

Quote:

Originally Posted by Sanders

Do you have any special HVAC going into the room to control the temp of the wines, or will it just be at whatever temp the house is kept at?

Sanders, i wired the room for its own mini AC unit and thermostat but since i don't drink and don't want to spend more money on something im not going to use ....im just going to finish the cabinetry and spend the AC money on guns

.

I might get some MT wine bottles from somewhere and stick them in the slots for show

There is a 5' space in the ceiling above the wine room that has a plywood platform with drip lines and electrical outlet dedicated for this small AC unit.

Sanders · 11-09-2017, 08:42 PM

I filled my wine rack with cheap wines that have cool-looking labels. I don't drink much wine, so it is just for decoration, also.

buzgun · 11-12-2017, 06:11 PM

Heres where im at right now......I built 2 frames to hold false door panels that go on the right and left side of this to cover up a gap in the curved wall that was unusable........I also made up 6 doors that fit inside the frames, carefully trimmed them to fit perfectly inside the frames, sanded them and put on the applied molding's.......this AM i stained the 6 false panel doors as well as the crown moulding so tomorrow it will be ready for me to shoot on the vinyl sealer, sand them , glaze and put on the finish lacquer coats.

44044 · 11-12-2017, 06:42 PM

Quote:

Originally Posted by buzgun

Heres where im at right now......I built 2 frames to hold false door panels that go on the right and left side of this to cover up a gap in the curved wall that was unusable........I also made up 6 doors that fit inside the frames, carefully trimmed them to fit perfectly inside the frames, sanded them and put on the applied molding's.......this AM i stained the 6 false panel doors as well as the crown moulding so tomorrow it will be ready for me to shoot on the vinyl sealer, sand them , glaze and put on the finish lacquer coats.

Damn you be busy...

10 Bears · 11-13-2017, 12:49 AM

Looking good Buzz.
But I think you're not telling too much about what's behind certain places.

That's okay though.
What we don't know cannot be dragged out even by torture.

buzgun · 11-13-2017, 01:04 AM

Quote:

Originally Posted by 10 Bears

Looking good Buzz.
But I think you're not telling too much about what's behind certain places.

That's okay though.
What we don't know cannot be dragged out even by torture.

Thank you 10 Bears

i know nothing

buzgun · 11-13-2017, 09:45 PM

Ok...for some reason tinypic is making my photos appear sideways............Anyway...i installed the false door panels today after i sprayed them with sealer, sanded them, glazed them with black glaze and then shot on the top coat of lacquer.......i now have just base and crown moulding trim left.

buzgun · 11-15-2017, 11:15 AM

I got this completed as far as i can yesterday......i still have to complete the back splash portion of this and im trying to decide if i want to have it made of the mexican stone or some kind of glass /mirror feature like an old west bar.

Czubek · 11-15-2017, 11:59 AM

Quote:

Originally Posted by buzgun

I got this completed as far as i can yesterday......i still have to complete the back splash portion of this and im trying to decide if i want to have it made of the mexican stone or some kind of glass /mirror feature like an old west bar.

Glass/mirror would go well in there, as it's got that theme kind of going there, anyhow.

This is looking real sharp, but I have come to expect the finest out of you.

Brian

10 Bears · 11-15-2017, 03:23 PM

Awesome fabrication! Can't wait to see your final finish.

buzgun · 11-15-2017, 05:14 PM

10 bears and Czubek , thank you gentlemen for the encouraging kind words.......Im having issues with tinypic and my phone.........anyhow here are some additional pics......i cant get these pics to stop posting sideways.....Sorry for the dark photos also......my phone takes some bad pics.

buzgun · 11-15-2017, 05:28 PM

Yes Czubek......im leaning toward a etched mirror of some kind...I have moulding that goes on to cover up the seams on the arch feature but i cant put it in until the backsplash is finished..i have a lot of stone going on already......I might cover the interior walls and ceiling of this wine room with brick veneer as well....but this is a project for the future.....for now im going to get the back splash made and call it good.

11-09-2017, 12:55 PM	#76
Sanders Moderator Join Date: Mar 2006 Posts: 66,447	Do you have any special HVAC going into the room to control the temp of the wines, or will it just be at whatever temp the house is kept at? __________________ "The truly dangerous man dresses inconspicuously and is soft- spoken. He walks away from most confrontations. The only time you learn that the truly dangerous man is mad at you is a split second before you die, for he never fights. He only kills. The truly dangerous man knows that fighting is what children do and killing is what men do." - Charley Reese 1986 3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-09-2017, 08:42 PM	#78
Sanders Moderator Join Date: Mar 2006 Posts: 66,447	I filled my wine rack with cheap wines that have cool-looking labels. I don't drink much wine, so it is just for decoration, also.

11-12-2017, 06:11 PM	#79
buzgun slug Join Date: Apr 2006 Posts: 25,638	Heres where im at right now......I built 2 frames to hold false door panels that go on the right and left side of this to cover up a gap in the curved wall that was unusable........I also made up 6 doors that fit inside the frames, carefully trimmed them to fit perfectly inside the frames, sanded them and put on the applied molding's.......this AM i stained the 6 false panel doors as well as the crown moulding so tomorrow it will be ready for me to shoot on the vinyl sealer, sand them , glaze and put on the finish lacquer coats.

11-13-2017, 12:49 AM	#81
10 Bears Moderator Join Date: Jul 2006 Location: E-Da-How Posts: 137,846	Looking good Buzz. But I think you're not telling too much about what's behind certain places. That's okay though. What we don't know cannot be dragged out even by torture.

11-13-2017, 09:45 PM	#83
buzgun slug Join Date: Apr 2006 Posts: 25,638	Ok...for some reason tinypic is making my photos appear sideways............Anyway...i installed the false door panels today after i sprayed them with sealer, sanded them, glazed them with black glaze and then shot on the top coat of lacquer.......i now have just base and crown moulding trim left.

11-15-2017, 11:15 AM	#84
buzgun slug Join Date: Apr 2006 Posts: 25,638	I got this completed as far as i can yesterday......i still have to complete the back splash portion of this and im trying to decide if i want to have it made of the mexican stone or some kind of glass /mirror feature like an old west bar.

11-15-2017, 03:23 PM	#86
10 Bears Moderator Join Date: Jul 2006 Location: E-Da-How Posts: 137,846	Awesome fabrication! Can't wait to see your final finish.

11-15-2017, 05:14 PM	#87
buzgun slug Join Date: Apr 2006 Posts: 25,638	10 bears and Czubek , thank you gentlemen for the encouraging kind words.......Im having issues with tinypic and my phone.........anyhow here are some additional pics......i cant get these pics to stop posting sideways.....Sorry for the dark photos also......my phone takes some bad pics.

11-15-2017, 05:28 PM	#88
buzgun slug Join Date: Apr 2006 Posts: 25,638	Yes Czubek......im leaning toward a etched mirror of some kind...I have moulding that goes on to cover up the seams on the arch feature but i cant put it in until the backsplash is finished..i have a lot of stone going on already......I might cover the interior walls and ceiling of this wine room with brick veneer as well....but this is a project for the future.....for now im going to get the back splash made and call it good.